GB2 16ch 16+2/4/2
Features
- 16 Mono, 2 Stereo Input Channels
- 2 Subgroup Outputs
- Matrix Mixer
- 4 Auxiliary Sends
- Direct Outputs
AED 6,780.60
Total # Of Inputs: | 16 Total |
Mic/Line Inputs: | 16 Line: 1/4″ TRS Phone 16 Microphone: 3-pin XLR |
Stereo Line Inputs: | 4 Stereo: L/R Paired 1/4″ Phone Line & 3-pin XLR Microphone |
In-Line Inputs/Returns: | No |
AUX Sends: | 4 Aux Sends |
AUX Returns: | 4 Stereo Returns |
Inserts: | 1/4″ TRS Phone – Mono Inputs, Main Output and Subgroup Outputs |
BUS (Group) Outputs: | 4 Subgroups: Balanced 3-pin XLR |
2 Trk Master I/O: | Mix L/R: Stereo Paired 3-pin XLR Balanced |
ALT I/O: | ALT Stereo: L/R Stereo Paired 1/4″ Output |
Monitor Outputs: | Monitor: L/R Stereo Paired 1/4″ TRS Phone |
EQ Section: | High Filter: 13kHz, +/- 15dB, 2nd order shelving Hi-Mid: 550Hz – 13khz, +/- 15dB, Q=1.5 Lo-Mid: 80Hz – 1.9kHz, +/- 15dB, Q=1.5 Low Filter: 80Hz, +/- 15dB, 2nd order shelving |
Solo/Mute: | All Input Channels |
Channel Level Control: | 100mm Faders |
Trim/Gain Control: | Rotary Potentiometers |
Phantom Power: | +48V Phantom individually switched |
Metering: | Input Channels: Single tri-color 4-segment LED bar graph Outputs: 7 tri-color 12-segment LED bar graphs, + Meter pod with 3 VU meters (L/R/C) |
Frequency Response: | 20Hz to 20kHz <1dB |
Dynamic Range: | not specified by manufacturer |
Signal-to-Noise Ratio: | Measured RMS, 22Hz to 22kHz Bandwidth -128dBu Mic E.I.N. @ unity gain, 150 ohms source impedance <-82dBu Mix Output, 40 inputs routed to mix <-83dBu Group & Center Outputs <-80dBu Aux Outputs <-89dBu Matrix Outputs |
Total Harmonic Distortion (THD): | <0.006%Mic sens. -30dBu, +20dBu at all outputs @ 1kHz |
Power Supply: | nternal AC PSU – 85V, 270V AC, 50/60Hz universal input Power Consumption Less than 150W |
Dimensions: | 36 x 31 x 12″ |
Weight: | 51.5 lb |
GB2 16ch 16+2/4/2
Reviews
There are no reviews yet.